It appears that both hosts are running PostgreSQL 8.2.5.  I'm running
8.2.4 (on both); does that seem like a plausible cause of difficulty?

It appears that the cluster initialization is being done from the
Windows host.  I was attempting to do it from the Linux host.  If I get
the chance, I'll try to figure out how to do it that way.

It looks like the screen shots show replication from SUSE
(192.168.1.125) to Windows (192.168.1.133).  That may turn out to be a
useful data point, but isn't a configuration that I have a use for.

I was hoping someone could point me to complete instructions on how to
set up a cluster, but it seems that such instructions aren't available.
I'm getting increasing pressure from my project manager to "stop messing
around and get on with it", so I may have to give up on Slony from
Windows soon, but I appreciate your help so far and hope you will have
much success in continuing your work.

Walter

-----Original Message-----
From: Hiroshi Saito [mailto:z-saito at guitar.ocn.ne.jp] 
Sent: Tuesday, November 13, 2007 10:06 PM
To: Andrew Hammond; Walter Coole
Cc: slony1-general at lists.slony.info
Subject: Re: [Slony1-general] Windows as master, Linux as slave

Hi.

This is Windows-XP SP2 to OpenSUSE 10.3 replication.!!
http://winpg.jp/~saito/Slony-I-sample/WindowsToOpenSUSE/
It should prove that what it is satisfactory.:-)

Regards,
Hiroshi Saito

----- Original Message ----- 
From: "Hiroshi Saito" <z-saito at guitar.ocn.ne.jp>
> Hi.
>
> Did you try the following?
> --
> Um, There was the before same report. However, The problem was not
reproduced in the
> environment of Dave with me. It was very strange. So, I wish to check
one.
> Here is a new version.
> http://developer.pgadmin.org/~hiroshi/Slony-I/
> And if a problem still reappears, please use this. (This is VC8
compile module)
> http://developer.pgadmin.org/~hiroshi/Slony-I/slevent.dll
> MinGW (GCC) will be suspected if it operates well.
> --
>
> Regards,
> Hiroshi Saito
>
> ----- Original Message ----- 
> From: Andrew Hammond
> To: Walter Coole
> Cc: Hiroshi Saito ; slony1-general at lists.slony.info
> Sent: Wednesday, November 14, 2007 6:32 AM
> Subject: Re: [Slony1-general] Windows as master, Linux as slave
>
>
> On Nov 13, 2007 12:54 PM, Walter Coole <WCoole at aperiogroup.com> wrote:
>
> I got slony for the Linux hosts from from slony1-1.2.10.tar, the
Windows hosts from 
> slony-I-1.2.11R-pg82.zip , so that might be the problem.
> Well, that's not gonna work. :)
>
> I tried installing PostgeSQL 8.2.4 and slony-I-1.2.10R-pg82 on a new
Windows host (not 
> previously installed with PostgreSQL or Slony) and got the same
"Module C:\Program 
> Files\PostgreSQL\8.2\lib\slevent.dll failed to register. HRESULT
-2147023898.  Contact 
> your support personnel." error.
> I don't know enough about the windows install to help you with this,
but Hiroshi probably 
> can. Saito-san?
> I tried changing the selected features and this error happens if (and
only if) I select 
> the feature "Slony-I server module".  Guessing by the name, I think I
need this feature.
> I suspect this is talking about the slons. In which case, you don't
need to run a slon on 
> the windows machine. You can run both slons on the linux box. However
I would suggest that 
> you run the slons for each machine from the machine it is managing
(unless you have 
> dedicated management servers on the same LAN, in which case, run them
there).
>
> As an experiment, I tried installing the various versions from 
> http://developer.pgadmin.org/~hiroshi/Slony-I/
> I assume that you already know this but I'll reiterate to be sure:
please do not run 
> ancient versions of the software. You are almost always better off
running the latest 
> 1.2.x release since there are very few features being added to 1.2
anymore, but plenty of 
> bug-fixes have gone in.
>
> Andrew
> _______________________________________________
> Slony1-general mailing list
> Slony1-general at lists.slony.info
> http://lists.slony.info/mailman/listinfo/slony1-general